Validation tests for NMC batteries
Notice description
Powstaje w kontekście projektu:
FENG.01.01-IP.01-A07U/24 - Opracowanie innowacyjnej rodziny wodorowo-elektrycznych autobusów Intercity
Update dated 23.06.2026:
Due to an error in the description of the scope of work, a correction has been introduced:
Was:
• Tests – Part 2 at 35°C ambient and 30°C coolant temperature
Is:
• Tests – Part 2 at 35°C ambient coolant temperature
No other changes have been made.
Due to the above correction, the Ordering Party has extended the bid submission deadline by 1 day, i.e. until 24.06.2026.
Validation tests for NMC batteries
a. Brief description of the subject of the contract:
The subject of the contract is a service involving the testing of NMC-type Li-ion batteries intended for use in Low Entry and Normal Floor intercity buses. The tests will involve verifying the key electrical and physical parameters of the batteries in order to confirm their safety and reliability. The work will be carried out as part of a project aimed at developing an innovative range of hydrogen-electric intercity buses. The test subject comprises a single battery system with a capacity of 399 Ah and a rated voltage of 670 V.
The scope includes:
• Electrical and environmental tests (cycling, power tests, temperature)
• Assessment of BMS functionality
• Analysis of operating parameters across various temperature ranges and SOC levels
• Assessment of charge and discharge performance, operation in bus driving conditions, internal resistance, cell balancing efficiency, and temperature distribution
• Preparation of a report which consist of:
o general information about the Contactor,
o the test station and equipment description (with parameters) and photographical documentation of it,
o detailed tests time-line, product preparation details and product parameters,
o description of each test step with parameters and the procedure,
o results of each test presentation i.e. graphical or tabular,
o summary of each test part,
o all parts results and summary,
o final conclusions with key findings and recommendations.
b. Purpose of the contract:
The aim of the contract is to develop and optimize a new generation of NMC battery systems. Conducting these tests will enable the identification and implementation of innovative solutions that enhance battery performance, safety and lifespan, which is crucial for improving the overall performance and reliability of future bus models.
c. Detailed description of the subject of the contract:
• HV Safety tests – earthing verification, resistance measurements, dielectric strength, BMS functionality, visual inspection
• Tests – Part 1 at 25°C:
o 5 full charge and discharge cycles, charged at a maximum current of 0.3C and current map, terminated when maximum cell voltage reach 4.086 V, discharge with 0.3C current terminated when minimum cell voltage reach 3.264V.
o Pulse power tests. Pulse tests at 1C current every 10% SOC whilst discharging the battery in the range from 90% to 10% SOC with 0.3C current. Charged to 100% (CC-CV, 0.3C, cut-off when maximum cell voltage reach 4.086 V).
o Bus driving profile cycling. Discharge/charge cycle in the range of 90%–10% SOC (charging/discharging pulses at 0.1-0.5C due to Ordering Party bus driving profile), and recharging to 100% at 1C). 1-hour break for cell balancing. The whole process repeated 9 times (overall 10 cycles).
• Tests – Part 2 at 35°C ambient and coolant temperature:
o 5 full charge and discharge cycles, charged at a maximum current of 0.3C and current map , terminated when maximum cell voltage reach 4.086 V.
o Pulse power tests. Pulse tests at 1C current every 10% SOC whilst discharging the battery in the range from 90% to 10% SOC with 0.3C current. Charged to 100% (CC-CV, 0.3C, cut-off when maximum cell voltage reach 4.086 V).
o Cycling. Discharge/charge cycle, discharge with 0.83C and charge with 0.86C and according to BMS limitation. Cycle between maximum cell voltage 4.086V for charge phase and minimum cell voltage 3.264V for discharge phase. 30-min break for cell balancing. The whole process repeated 99 times (overall 100 cycles).
• Tests at different temperatures ranges: 25°C, 15°C, 5°C, 35°C and 45°C:
5 full charge and discharge cycles at each temperature range: 25°C, 15°C, 5°C, 35°C and 45°C, charged at a maximum current of 0.3C and current map , terminated when maximum cell voltage reach 4.086 V.
The test schedule may be modified or adjusted following consultation with the service provider and an initial analysis of the battery’s performance. As the sample being tested is a new product, the initial cycles may reveal a need to adapt the details of the test procedure to the battery’s specific limitations.
d. CPV codes for the contract:
73100000-3 – Research and experimental development services
73300000-5 – Research design and implementation, and development
31422000-0 – Battery packs
31434000-7 – Lithium accumulators
e. Term of the contract:
Start of works: 13th July 2026, completion: 7th September 2026
Provisional schedule for the contract:
• Stage I. Preparation for testing in accordance with the plan and scope drawn up by the Contracting Authority: 13th July 2026 – 22nd July 2026
• Stage II. Conducting tests: 23rd July 2026 – 27th August 2026
• Stage III. Data analysis and report preparation: 28th August 2026 – 7th September 2026
The 7th September 2026 is the date when the Contactor must send final report to the Ordering Party. The battery must be returned by the Contractor to the 30th September 2026.
Responsibility of goods shipment will be on the Ordering Party side.
The Ordering Party reserves the right to amend the test schedule in the event of a delay in the delivery of the batteries to be tested or the need to adjust it to other project activities that are not within the scope of this contract.
f. Tender validity period − at least 30 calendar from the day following the deadline of submission of
tenders. At the request of the Ordering Party, the tenderers may be once required to extend the tender validity period by additional 60 days under pain of rejecting the tender.
g. Partial tenders - The Ordering Party does not allow partial offers to be submitted under this announcement.
This contract (2026-7175-281561) forms part of the battery testing programme implemented within the project. Subsequent contracts will, in particular, cover the development of digital twin models, battery qualification and validation testing, as well as the assessment of compliance with applicable regulatory requirements.
h. Variant tenders - The Ordering Party does not permit the submission of variant tenders.
i. Subcontracting - The Ordering Party does not permit the possibility of subcontracting works to entities other than the Tender.
Equilibrity
Wherever the object of the command is described with the trademarks, patents or origin, source or a specific process it is permitted to apply solutions equal to the described ones under condition that they would have the same or better technical and functional specifications and would not downgrade standards indicated in documentation.
Wherever the object of the command is described by reference to the standards, technical evaluations, specifications or technical reference systems it is permitted to apply solutions equal to the described ones.
Okres gwarancji: zgodnie z umową
Miejsce realizacji
Kraj: Polska, Województwo: wielkopolskie, Powiat: poznański, Gmina: Czerwonak, Miejscowość: Bolechowo-Osiedle
FENG.01.01-IP.01-A07U/24 - Opracowanie innowacyjnej rodziny wodorowo-elektrycznych autobusów Intercity
Update dated 23.06.2026:
Due to an error in the description of the scope of work, a correction has been introduced:
Was:
• Tests – Part 2 at 35°C ambient and 30°C coolant temperature
Is:
• Tests – Part 2 at 35°C ambient coolant temperature
No other changes have been made.
Due to the above correction, the Ordering Party has extended the bid submission deadline by 1 day, i.e. until 24.06.2026.
Validation tests for NMC batteries
a. Brief description of the subject of the contract:
The subject of the contract is a service involving the testing of NMC-type Li-ion batteries intended for use in Low Entry and Normal Floor intercity buses. The tests will involve verifying the key electrical and physical parameters of the batteries in order to confirm their safety and reliability. The work will be carried out as part of a project aimed at developing an innovative range of hydrogen-electric intercity buses. The test subject comprises a single battery system with a capacity of 399 Ah and a rated voltage of 670 V.
The scope includes:
• Electrical and environmental tests (cycling, power tests, temperature)
• Assessment of BMS functionality
• Analysis of operating parameters across various temperature ranges and SOC levels
• Assessment of charge and discharge performance, operation in bus driving conditions, internal resistance, cell balancing efficiency, and temperature distribution
• Preparation of a report which consist of:
o general information about the Contactor,
o the test station and equipment description (with parameters) and photographical documentation of it,
o detailed tests time-line, product preparation details and product parameters,
o description of each test step with parameters and the procedure,
o results of each test presentation i.e. graphical or tabular,
o summary of each test part,
o all parts results and summary,
o final conclusions with key findings and recommendations.
b. Purpose of the contract:
The aim of the contract is to develop and optimize a new generation of NMC battery systems. Conducting these tests will enable the identification and implementation of innovative solutions that enhance battery performance, safety and lifespan, which is crucial for improving the overall performance and reliability of future bus models.
c. Detailed description of the subject of the contract:
• HV Safety tests – earthing verification, resistance measurements, dielectric strength, BMS functionality, visual inspection
• Tests – Part 1 at 25°C:
o 5 full charge and discharge cycles, charged at a maximum current of 0.3C and current map, terminated when maximum cell voltage reach 4.086 V, discharge with 0.3C current terminated when minimum cell voltage reach 3.264V.
o Pulse power tests. Pulse tests at 1C current every 10% SOC whilst discharging the battery in the range from 90% to 10% SOC with 0.3C current. Charged to 100% (CC-CV, 0.3C, cut-off when maximum cell voltage reach 4.086 V).
o Bus driving profile cycling. Discharge/charge cycle in the range of 90%–10% SOC (charging/discharging pulses at 0.1-0.5C due to Ordering Party bus driving profile), and recharging to 100% at 1C). 1-hour break for cell balancing. The whole process repeated 9 times (overall 10 cycles).
• Tests – Part 2 at 35°C ambient and coolant temperature:
o 5 full charge and discharge cycles, charged at a maximum current of 0.3C and current map , terminated when maximum cell voltage reach 4.086 V.
o Pulse power tests. Pulse tests at 1C current every 10% SOC whilst discharging the battery in the range from 90% to 10% SOC with 0.3C current. Charged to 100% (CC-CV, 0.3C, cut-off when maximum cell voltage reach 4.086 V).
o Cycling. Discharge/charge cycle, discharge with 0.83C and charge with 0.86C and according to BMS limitation. Cycle between maximum cell voltage 4.086V for charge phase and minimum cell voltage 3.264V for discharge phase. 30-min break for cell balancing. The whole process repeated 99 times (overall 100 cycles).
• Tests at different temperatures ranges: 25°C, 15°C, 5°C, 35°C and 45°C:
5 full charge and discharge cycles at each temperature range: 25°C, 15°C, 5°C, 35°C and 45°C, charged at a maximum current of 0.3C and current map , terminated when maximum cell voltage reach 4.086 V.
The test schedule may be modified or adjusted following consultation with the service provider and an initial analysis of the battery’s performance. As the sample being tested is a new product, the initial cycles may reveal a need to adapt the details of the test procedure to the battery’s specific limitations.
d. CPV codes for the contract:
73100000-3 – Research and experimental development services
73300000-5 – Research design and implementation, and development
31422000-0 – Battery packs
31434000-7 – Lithium accumulators
e. Term of the contract:
Start of works: 13th July 2026, completion: 7th September 2026
Provisional schedule for the contract:
• Stage I. Preparation for testing in accordance with the plan and scope drawn up by the Contracting Authority: 13th July 2026 – 22nd July 2026
• Stage II. Conducting tests: 23rd July 2026 – 27th August 2026
• Stage III. Data analysis and report preparation: 28th August 2026 – 7th September 2026
The 7th September 2026 is the date when the Contactor must send final report to the Ordering Party. The battery must be returned by the Contractor to the 30th September 2026.
Responsibility of goods shipment will be on the Ordering Party side.
The Ordering Party reserves the right to amend the test schedule in the event of a delay in the delivery of the batteries to be tested or the need to adjust it to other project activities that are not within the scope of this contract.
f. Tender validity period − at least 30 calendar from the day following the deadline of submission of
tenders. At the request of the Ordering Party, the tenderers may be once required to extend the tender validity period by additional 60 days under pain of rejecting the tender.
g. Partial tenders - The Ordering Party does not allow partial offers to be submitted under this announcement.
This contract (2026-7175-281561) forms part of the battery testing programme implemented within the project. Subsequent contracts will, in particular, cover the development of digital twin models, battery qualification and validation testing, as well as the assessment of compliance with applicable regulatory requirements.
h. Variant tenders - The Ordering Party does not permit the submission of variant tenders.
i. Subcontracting - The Ordering Party does not permit the possibility of subcontracting works to entities other than the Tender.
Equilibrity
Wherever the object of the command is described with the trademarks, patents or origin, source or a specific process it is permitted to apply solutions equal to the described ones under condition that they would have the same or better technical and functional specifications and would not downgrade standards indicated in documentation.
Wherever the object of the command is described by reference to the standards, technical evaluations, specifications or technical reference systems it is permitted to apply solutions equal to the described ones.
Okres gwarancji: zgodnie z umową
Miejsce realizacji
Kraj: Polska, Województwo: wielkopolskie, Powiat: poznański, Gmina: Czerwonak, Miejscowość: Bolechowo-Osiedle
Time limit for receipt of tenders
2026-06-24 21:59:59.0
Location
Kraj: Polska, Województwo: wielkopolskie, Powiat: poznański, Gmina: Czerwonak, Miejscowość: Bolechowo-Osiedle
Category assortment
Measurements, tests and technical acceptance
Market research and development
Electrical power equipment parts
Market research and development
Electrical power equipment parts
Buyer details
Solaris Bus & Coach sp. z o.o.
ul. Obornicka 46
62-005 Bolechowo-Osiedle
Województwo: wielkopolskie
Kraj: Polska
NIP: 5240015630
ul. Obornicka 46
62-005 Bolechowo-Osiedle
Województwo: wielkopolskie
Kraj: Polska
NIP: 5240015630
